This accessory for the MC70 series of terminals provides GPS capability. The unit attaches as a sleeve around the MC70. The mechanical design of the module enables the attachment to remain compatible with existing MC70 accessories such as the desktop charge cradle and the car charger. The USB port from the MC70 is brought through to the docking connector on the bottom of the GPS sleeve to provide ActiveSync connectivity to the MC70.

The GPS unit uses the SiRFStarIII chipset and has an integrated antenna. Communication with the MC70 terminal is over the serial port. By default, communication uses the NMEA-0183 protocol allowing immediate operation with standard software packages. The unit can be configured for baud rates up to 57600baud. SiRF protocol may be used in place of NMEA.

Product Data Sheet | Download

The reader provides the Symbol™ MC70 with functionality of reading most 13.56MHz ISO transponders. The HF RFID reader is powered from the Symbol terminal and houses both the RFID reader and the antenna. The Symbol MC70 retains the original laser bar code functionality as well as the original communications platform housed within the terminal. The HF RFID reader provides the ability to read and write to a wide variety of transponders at 13.56 MHz including ISO 15693, ICODE (I & II) and the complete Mifare family of ISO14443 (A&B).

Product Data Sheet | Download

This accessory for the MC70 series of terminals provides a Smart Card and Memory card capability. The unit attaches as a sleeve around the MC70—the mechanical design of the module enables the attachment to remain compatible with existing MC70 accessories such as the desktop charge cradle and the car charger. The USB port from the MC70 is brought through to the docking connector on the bottom of the Smart Card reader to provide ActiveSync connectivity to the MC70. The Smart Card Reader is compliant to ISO7816-1,2,3,4, supports T=0 and T=1 protocols and Synchronous and Asynchronous mode. The reader is based on industry standards, including PC/SC, EMV, FINREAD and Common Criteria to address a wide range of applications across government, enterprise and financial sectors.

Product Data Sheet | Download

This SDIO card upgrades the MC70 series of terminals by providing IrDA functionality. The card uses the SDIO slot on the side of the MC70 and is provided with a replacement cover moulding to allow IR transmission whilst maintaining the IP rating of the MC70. The SDIO card operates with the Microsoft IrDA stack and an additional driver to implement an SIR (115.2kbps maximum) interface.

Product Data Sheet | Download

This accessory for the MC70 series of terminals provides a Smart Card and Memory card capability. The unit attaches as a sleeve around the MC70—the mechanical design of the module enables the attachment to remain compatible with existing MC70 accessories such as the desktop charge cradle and the car charger. The USB port from the MC70 is brought through to the docking connector on the bottom of the Smart Card reader to provide ActiveSync connectivity to the MC70. The Smart Card Reader is compliant to ISO7816-1,2,3,4, supports T=0 and T=1 protocols and Synchronous and Asynchronous mode. The reader is based on industry standards, including PC/SC, EMV, FINREAD and Common Criteria to address a wide range of applications across government, enterprise and financial sectors.

Product Data Sheet | Download